Quote:
Originally Posted by Paul Workman
Key @ OFF, current to the pump diagnostic connector (approx. 2" red wire, black spade connector, jutting out of the big wire loom in vicinity of the w/s wiper motor) = 4 to 5 amperes/pump; 8-10 is what it should read. 53 to 55# @ the Schrader valve = Good. (But U know all that!  |
Interesting... getting 7amps and 49#, question is, is that enough to get nothing out of the secondaries? My guess is that the primary pump is good, she drives and idles nicely. The secondary pump must be close to dead. I think I'll pull the fp1 fuse and see what I get.
H