ZR-1 Net Registry Forums - View Single Post

Z51JEFF · 07-10-2017

The Z part is maybe 1/2 shorter than the non Z part but worst case scenario one can be sectioned and made to work. I'd be curious to know if one can be 3D printed.

07-10-2017	#12
Z51JEFF Join Date: Dec 2007 Location: Fremont, CA Posts: 3,093	Re: Front quarter panel molding The Z part is maybe 1/2 shorter than the non Z part but worst case scenario one can be sectioned and made to work. I'd be curious to know if one can be 3D printed.