Quote:
Originally Posted by Ccmano
What brand are yours, Cliff? The aftermarket bearing I have does not spin in the frame at all.
H
|
The standard one
A. When you engage the clutch placing pressure (pulling with the Clutch Fork) on the Throwout bearing the inner bearing is working/spinning.
B. When you release the clutch, the outer bearing is always spinning.
C. The inside collar is prevented from spinning by the Clutch Fork. The Outside collar is always spinning with the Pressure Plate.
D. The Clutch Disk is spinning or not depending on if it is compressed between the Pressure Plate and the Flywheel.
Throwout Bearings and Clutch Forks