ZR-1 Net Registry Forums - View Single Post

XfireZ51 · 02-01-2018

One other point about employing carbs sitting on top of the LT5 plenum. The plenum and injector housing was designed as a dry induction system for port fuel injection. Quite a few twists and turns in the journey of air from TB to combustion chamber. Runner length is quite long. I can see quite an issue with fuel coming out of suspension in the induction tract and dumping raw fuel onto the valves. Don't mean to rain on your parade, but I don't think its a very workable configuration.

02-01-2018	#28
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Re: 92 LT5 ecu ignition program and control One other point about employing carbs sitting on top of the LT5 plenum. The plenum and injector housing was designed as a dry induction system for port fuel injection. Quite a few twists and turns in the journey of air from TB to combustion chamber. Runner length is quite long. I can see quite an issue with fuel coming out of suspension in the induction tract and dumping raw fuel onto the valves. Don't mean to rain on your parade, but I don't think its a very workable configuration.