ZR-1 Net Registry Forums - View Single Post

onetinsoldier · 07-12-2018

Trying to see what sequence ZR1 owners are using to start the engine both cold and hot . I rarely crack the throttle when starting my computer controlled vehicles except for one corvette I have , but thats due to a larger roller cam with a rough idle .

91 ZR1

COLD- get in , push in the clutch , turn key on , wait about 10 seconds , then turn it over . I do not give it any pedal at all.
HOT - same

Now I have been having Hot restart issues and I"m wondering if not giving it some pedal , is causing or part of the no hot start problem ?

I would like to hear other owners start procedures to see if what someone is doing will solve my problem !

07-12-2018	#1
onetinsoldier Join Date: Aug 2016 Location: Spring Hill, FL Posts: 127	Starting procedure/sequence ? Trying to see what sequence ZR1 owners are using to start the engine both cold and hot . I rarely crack the throttle when starting my computer controlled vehicles except for one corvette I have , but thats due to a larger roller cam with a rough idle . 91 ZR1 COLD- get in , push in the clutch , turn key on , wait about 10 seconds , then turn it over . I do not give it any pedal at all. HOT - same Now I have been having Hot restart issues and I"m wondering if not giving it some pedal , is causing or part of the no hot start problem ? I would like to hear other owners start procedures to see if what someone is doing will solve my problem !