ZR-1 Net Registry Forums - View Single Post - Sway bar link bushing install, frustrated in FLl

32valvZ · 01-30-2019

Believe it or not, I have done the upper ball joints on a couple of other C4's and other cars as well... I left the upper arm in place and drilled the rivets out and used a punch to drive them out. It worked well actually...

I dont have a problem with my front end, just wanted to replace all the rubber bushings... I wasnt planning on doing ball joints really this time around. Car drives straight and true. Only have 34k miles on it.

01-30-2019	#12
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,061	Re: Sway bar link bushing install, frustrated in FLl Believe it or not, I have done the upper ball joints on a couple of other C4's and other cars as well... I left the upper arm in place and drilled the rivets out and used a punch to drive them out. It worked well actually... I dont have a problem with my front end, just wanted to replace all the rubber bushings... I wasnt planning on doing ball joints really this time around. Car drives straight and true. Only have 34k miles on it.