ZR-1 Net Registry Forums - View Single Post

01-17-2008

The front bolts you can get only by removing the K rail support pieces, which isn't that big of a deal to remove. the front two bolts are 89 in lbs. The others are 20 ft lbs. Don't forget some are double nutted as they hold brackets and shields, so remove those to access the real bolt that holds the pan secure.

And there is no set torque pattern.

01-17-2008	#4
Jeffvette Guest Posts: n/a	Re: Oil 'pan' question>>> The front bolts you can get only by removing the K rail support pieces, which isn't that big of a deal to remove. the front two bolts are 89 in lbs. The others are 20 ft lbs. Don't forget some are double nutted as they hold brackets and shields, so remove those to access the real bolt that holds the pan secure. And there is no set torque pattern.