Quote:
|
Originally Posted by 32valvZ
Ok, heres what I know from the previous owner. The plug wires were replaced in May (ish) 07 They look really good. Also, a few weeks ago, I checked the injectors with an ohm meter while hot. They all specd out between 13.7 & 14.0 ohms.......should I replace them anyway? The 2 hoses on the breather box are really hard...does that mean replacement?
|
If you can afford replacing the injectors you should.
My breather box hoses were hard too...but they still work. Kurt White has some of the original hoses and some Samco hoses for the breather box. The hoses cost at least $45 each....which to me is ridiculous. You may be able to take the hoses off and go match them up to some that will work at a parts store.