Thread: Best
View Single Post
Old 01-19-2008   #3
rkreigh
 
Join Date: Jan 2004
Location: Alex VA
Posts: 1,080
Default Re: Best

sears and a few other tool stores have a "cable clamp tool" it's designed specifically for the spring clamps which maintain tension. the LT5 has a high flow water pump and I used the fancy clamps we sell on the store and went to the samco hoses. it didn't happen at first, but I too notice the "coolant smell" and I have tightened up the clamps but still am getting the smell. for that reason, I would stay with the factory clamps. they are cheap, work, and although a pain to work with, likely will eliminate this problem.

the hoses are tough to work on. remove the belt and the tensioner to make access a bit easier. a lift really helps getting to the thermostat housing and the short hoses are very tight.

the samco hoses look great and will likely last longer than the car!
rkreigh is offline   Reply With Quote