Quote:
Originally Posted by Vette Guy
The poly glass does not hold up as you may believe. It does scratch easy, does not remain crystal clear, and must be fastened and used with reinforcement braces, else it will flex and break. I run glass on the front and poly rear. They do make side windows, but really only for security - I have a set. You'd never want to run them at speed, rather best installed to deter thieves from easily getting into your car.
|
I worked at a shop that resold and machined LOTS of engineering grade plastics.
Polycarbonate is very soft and does scratch easily. If it has mar resistant coating (like MR10) it has a very thin very hard coating, like headlights. It is still very easy to put a deep gouge right through the coating.
Polycarbonate (trade name Lexan) will not "break". Acrylic (trade name plexiglass) will. Acrylic is much harder and scratch resistance and has shorter chain polymers and will crack and break. Polycarbonate with its long chain polymers will take repeated bends in the same direction over a very long period of time before it will break.