ZR-1 Net Registry Forums - View Single Post

Jagdpanzer · 12-03-2019

I hold the end of the cam shaft firmly with a box end wrench and loosen the sprocket retainer bolt with a 1/2” pneumatic impact. The impact hammer blows do a good job of breaking the bolt free of the Loctite without putting an excessive twisting force on the camshaft.

Sent from my iPhone using ZR-1 Net Registry

12-03-2019	#3
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,651	Re: Careful with that camshaft I hold the end of the cam shaft firmly with a box end wrench and loosen the sprocket retainer bolt with a 1/2” pneumatic impact. The impact hammer blows do a good job of breaking the bolt free of the Loctite without putting an excessive twisting force on the camshaft. Sent from my iPhone using ZR-1 Net Registry __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake