ZR-1 Net Registry Forums - View Single Post - Is It Bad If This Is Rattling Around Inside?

jss06c6 · 11-28-2020

Have seen one using the G1 chip adapter come loose. It was the MEMCAL chip assembly detaching from the G1 adapter because the G1 wasn't fully seated. The G1 should "clip" in just like the MEMCAL unit does.

Agree with Pete that soldering is a permanent solution, but the G1 should not cause issues if installed correctly..

Securing the "piggyback" assembly if it came loose is a 5 minute repair... you can add a dab of silicone (for electronics) to help if the G1 to MEMCAL is not tight.37751.jpg

Sent from my SM-G950U using ZR-1 Net Registry mobile app

11-28-2020	#9
jss06c6 Join Date: Aug 2015 Location: Magnolia, Texas Posts: 884	Re: Is It Bad If This Is Rattling Around Inside? Have seen one using the G1 chip adapter come loose. It was the MEMCAL chip assembly detaching from the G1 adapter because the G1 wasn't fully seated. The G1 should "clip" in just like the MEMCAL unit does. Agree with Pete that soldering is a permanent solution, but the G1 should not cause issues if installed correctly.. Securing the "piggyback" assembly if it came loose is a 5 minute repair... you can add a dab of silicone (for electronics) to help if the G1 to MEMCAL is not tight.37751.jpg Sent from my SM-G950U using ZR-1 Net Registry mobile app