Quote:
Originally Posted by Wigert
Okay so I am a bit embarrassed to admit this but I initially put the lower control arm in the position of the shock mount point on the nuckle. It created an awkward angle and restricted the movement. An easy switch to the correct hole corrected everything and now the movement is smooth.
Did you change the u-joints on the half shafts? I have significant rust and not sure if I dare to use significant force to remove the bolts while risking breaking them or stripping the threads. Any thought?
Thanks for the support so far!
Sent from my EVR-L29 using ZR-1 Net Registry mobile app |
I did not do my U-Joints.... You can try using penetrating oil/spray and soak the rusty bolts for a day or so and see if that helps loosen up the rust.