ZR-1 Net Registry Forums - View Single Post - How to replace Brake Light Switch / Stoplamp Switch?

conesare2seconds · 03-06-2021

I did this a while back on my Callaway, there?s a thread somewhere. The brake switch just pulls up and our if memory serves. It?s a tight fit, you are pulling against the threads and the clip, but no big deal. The electrical connector is fiddly, yes. A strategically placed, tiny flat blade screwdriver is helpful. Be prepared to adjust the switch, once installed. Have a helper stand behind the car and let you know if the brake lights are on and when they go off. I got lucky, it was correct on the first try.

03-06-2021	#2
conesare2seconds Join Date: Jul 2016 Location: Greater St. Louis Posts: 490	Re: How to replace Brake Light Switch / Stoplamp Switch? I did this a while back on my Callaway, there?s a thread somewhere. The brake switch just pulls up and our if memory serves. It?s a tight fit, you are pulling against the threads and the clip, but no big deal. The electrical connector is fiddly, yes. A strategically placed, tiny flat blade screwdriver is helpful. Be prepared to adjust the switch, once installed. Have a helper stand behind the car and let you know if the brake lights are on and when they go off. I got lucky, it was correct on the first try.