[32valvZ]

Got it figured out myself.... So I guess when a code is set there will be no power sent to the LP switch until the battery is disco'd and the HVAC controller is reset.

Got that figured out and then figured out that when the freon is low the clutch will cycle 3 or 4 times, then the code resets again.

I had a code 9. Well, the problem was the little gauge thats provided on the recharge can was not reliable and telling me it was full and in the red zone when it actually was not.

During my research, I came across a post about looking at the evaporator in the squirrel cage housing and checking to see the foam was still in place. Mine was and was also amazingly soft and pliable still.... But I did find this junk in there from a long time ago I suppose...

Temp went from 49 to 40 degrees after cleaning it all out of there..