ZR-1 Net Registry Forums - View Single Post

A26B · 08-21-2021

Just follow general procedure, start in the center, alternate left, then right of center until outer bolts are reached.
I recommend 4 steps to final torque, starting with light snug down in sequence, then 1/2 torque in sequence, then full torque in sequence. final pass at full torque again, in sequence.

Sent from my iPhone using ZR-1 Net Registry

08-21-2021	#4
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,404	Re: Injector Housing Bolts Just follow general procedure, start in the center, alternate left, then right of center until outer bolts are reached. I recommend 4 steps to final torque, starting with light snug down in sequence, then 1/2 torque in sequence, then full torque in sequence. final pass at full torque again, in sequence. Sent from my iPhone using ZR-1 Net Registry __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.