Join Date: May 2007
Location: Peoria, AZ
Posts: 9,119
|
Re: Extra speednut in dash??
Quote:
Originally Posted by ram_g
Hi folks,
In the midst of tackling the removal of the LTPWS bulbs from the DIC (finally!). So far I?ve got various pieces of trim removed, without breaking anything, phew. One of the side things I wanted to address was to try and silence an annoying buzz/rattle that would occur, at certain rpms only, in the vicinity of the radio, and that would go away if I pressed firmly on the plastic molding to the right of the radio.
So what I did find looks to be an extra speednut right there, that does seem to be loose and potentially could cause the buzz. But before I remove it - what is it?s purpose? It does not hold up any part of the trim or anything else as far as I can see.
Any ideas? TIA!!
|
It's been a while since I have been back there but I think you are missing the tab from the right side of the console tunnel. A plastic tab appears to be broken off that joins the right side. You can see the jagged edge where the the tab once was. That a common broken part and to replace it you need to replace the whole side of the passenger console. Since that's where you think the vibration buzz is coming from I suggest putting a put a small strip of the handgun cutout foam in there and button everything up. Or find a replacement with an unbroken tab. The good news are these are not ZR-1 specific but difficult to find with that tab intact. They break easy if anybody services the radio in the cars lifetime. And chances of that happening in a 30 plus year car are high. When these do come up for sale they are normally sold in pairs. (Each side) Good luck. 
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V
Arizona State Director
91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat
90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat
11 RED/GREY CTS-V
Last edited by GOLDCYLON; 12-31-2021 at 02:56 AM.
|