[Pete]

You will need to keep the electric secondary solonoid,vacuum pump and
differantial MAP(under ECM early) (under plenum later).

You will need to run from the Differantial MAP to the open port of the solonoid the vacuum pump to the closed port of the solonoid.


Make sure you yank everything else shafts included use Dorman freez-plug #555-108 or equal local part store.

Make sure you have Full Power ON when you go for a test drive.
Enjoy.

This is what i can remember off the top of my head,age is catching up to my memory.

If you need more info just post.
Pete