ZR-1 Net Registry Forums - View Single Post - WTB

tokuzumi · 07-11-2022

Thought I had some pictures, but I ordered 3 24"x16" sheets of black abs plastic and made a new plate housing. I didn't do a great job with the outer opening corners, so I'll probably redo it at a later time. But from 15' away nothing looks out of place.

Functions exactly like the old one. Slot for the plate to slide inside the "pocket".

All in cost was about $40 and 90 minutes of my time.

07-11-2022	#5
tokuzumi Join Date: Jun 2022 Location: Alpharetta Posts: 28	Re: WTB - Rear license plate holder Thought I had some pictures, but I ordered 3 24"x16" sheets of black abs plastic and made a new plate housing. I didn't do a great job with the outer opening corners, so I'll probably redo it at a later time. But from 15' away nothing looks out of place. Functions exactly like the old one. Slot for the plate to slide inside the "pocket". All in cost was about $40 and 90 minutes of my time.