View Single Post
Old 09-03-2022   #8
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,816
Default Re: 1991 zr1 bigger brakes with stock sawblades

Quote:
Originally Posted by GOLDCYLON View Post
For those doing this mod 6 piston with Wilwood and 17 inch Fiske FM5s they will fit. Spacers were not needed.
Did you use any shims to center the Rotor within the Calipers (The larger shims)?
Using the larger shims actually moves the caliper closer to the Wheel Spokes.

Did you use any shims to align the Brake Pads on the Wear Surface of the Rotors (The small shims)?

The need for shims varies from wheel to wheel. Wilwood provides 12 large shims (.015") and 16 small shims (.025") with each 140-8337 Brake Kit.


Last edited by Dynomite; 09-03-2022 at 10:27 AM.
Dynomite is offline   Reply With Quote