Re: Removing tight hydraulic line from slave cylinder
I thought you are upgrading your hydraulic line and clutch slave cylinder to later model design? If you are I would not give a hoot about damaging the line or fitting as long as you have the new style cylinder and hose on hand. The attached photo is the late model hydraulic hose that is available and hopefully you can find the good, rebuildable clutch slave cylinder. I know the cast ones are not ideal and I was fortunate enough to have Jim Jandik rebuild before he retired. If you have not already I would contact Bill B ZF Doc to see what he has or the latest best available.
__________________
Craig
"ZR-1 NO KA 'OI"
"ZR-1 ICHIBAN"
1995 #228 Black/Black with Dunn Heads
ZR-1 owner since September 2003
ZR-1 Net Registry Founding Member #0074
NCM Lifetime Member #2048
Last edited by HAWAIIZR-1; 06-28-2023 at 12:33 AM.
|