ZR-1 Net Registry Forums - View Single Post

secondchance · 08-04-2023

I would remove the TPS, rig volt meter to it and slowly move the lever observing the voltage. If the voltage moves progressively, good. If it spikes and fluctuate, bad TPS. My original TPS was worn around 1500 to 2200 rpm. Understandable?

08-04-2023	#2
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,731	Re: TPS problem I would remove the TPS, rig volt meter to it and slowly move the lever observing the voltage. If the voltage moves progressively, good. If it spikes and fluctuate, bad TPS. My original TPS was worn around 1500 to 2200 rpm. Understandable?