ZR-1 Net Registry Forums - View Single Post

Chuck Banks · 08-10-2023

Tested the TPS off the car using an analog ohmmeter. The sweep of the needle was uneven from the idle position for a short distance before it became smooth for the rest of the travel of the arm. I replaced the TPS with one from Standard Motor Products. Problem seems to be resolved. Thanks for the tip on checking the TPS.

08-10-2023	#6
Chuck Banks Join Date: Nov 2018 Location: Prescott Valley, AZ Posts: 12	Re: TPS problem Tested the TPS off the car using an analog ohmmeter. The sweep of the needle was uneven from the idle position for a short distance before it became smooth for the rest of the travel of the arm. I replaced the TPS with one from Standard Motor Products. Problem seems to be resolved. Thanks for the tip on checking the TPS.