ZR-1 Net Registry Forums - View Single Post

bobbyhi · 03-31-2008

To get those 2 bolts out you first have to take out the drivers seat. 2nd you have to take off the brake booster. It is only then that you can get the bolts off. The 4 nuts that hold the brake booster on from the inside is really hard to get at. The guys who engineered that must have had a hang-over from the night before

. Good luck....

03-31-2008	#2
bobbyhi Join Date: Jul 2005 Location: Mendota Heights, MN. 55120 Posts: 983	Re: Cam cover seal To get those 2 bolts out you first have to take out the drivers seat. 2nd you have to take off the brake booster. It is only then that you can get the bolts off. The 4 nuts that hold the brake booster on from the inside is really hard to get at. The guys who engineered that must have had a hang-over from the night before . Good luck....