Quote:
Originally Posted by Jeffvette
Unplug the brown connector first. Then probe. With the brown connector unplugged the vehicle will not start. Do not unplug it with the vehicle running.
No problem.
|
Jeff,
Sorry to be a pain but just to be sure,
step 1. unplug the brown plug and connect probe
step 2. then turn the engine over?
Presume it won't start as you say but will show a reading?
Manual is a little unclear as it says 'test with engine running' naturally that's a little tricky if you can't unplug the brown plug when running although can always 'splice' into the wire and test.