ZR-1 Net Registry Forums - View Single Post - New wheel question for the ZR1 Big Brake/Wheel experts

01-02-2009

Each caliper and mounting system is different. The factory offset for the front is 56mm and the rear 36mm.

I run a Brembo 4 piston caliper front and rear and in the front I clear the rim spoke by about the width of a penny. No spacers.

Your best bet for running a 4/6 piston with a oversized rotor is to use a 3 piece wheel and custom build from there.

01-02-2009	#2
Jeffvette Guest Posts: n/a	Re: New wheel question for the ZR1 Big Brake/Wheel experts Each caliper and mounting system is different. The factory offset for the front is 56mm and the rear 36mm. I run a Brembo 4 piston caliper front and rear and in the front I clear the rim spoke by about the width of a penny. No spacers. Your best bet for running a 4/6 piston with a oversized rotor is to use a 3 piece wheel and custom build from there.