ZR-1 Net Registry Forums - View Single Post

Jarek5_7 · 01-18-2009

I have high idle , around 1100 or little more rpm.

on datamaster desired idle is 650. recently I changed plenum gaskets, injectors, coils, spark plugs and wires because there was a problem with ingnition, miss etc. now the only problem left is high idle.
(oh maybe not the only

but most annoying)

I`ve read that tps v should be from 0.54 to 6v
mine at idle are around 0.24v

other thing is how to check iac?
datamaster shows that iac is 0 on idle , whem I rev a little it goes to 30 and them falls to 0, with it rpm falls but now as low as I wanted it to be.

is the a way to check iac? or to calibrate it?

01-18-2009	#1
Jarek5_7 Join Date: Aug 2008 Location: Radom, Poland Posts: 38	high idle I have high idle , around 1100 or little more rpm. on datamaster desired idle is 650. recently I changed plenum gaskets, injectors, coils, spark plugs and wires because there was a problem with ingnition, miss etc. now the only problem left is high idle. (oh maybe not the only but most annoying) I`ve read that tps v should be from 0.54 to 6v mine at idle are around 0.24v other thing is how to check iac? datamaster shows that iac is 0 on idle , whem I rev a little it goes to 30 and them falls to 0, with it rpm falls but now as low as I wanted it to be. is the a way to check iac? or to calibrate it?