ZR-1 Net Registry Forums - View Single Post

1991ZR1 · 01-25-2009

I like the simple design of these wheels. I had a hard time choosing between these and Fikse FM5. I also had a hard time choosing the finish. I ended up going with the polished finish. These are HRE 445R. Fronts are 18 x 10 with 56 mm offset and 275/35/18 tires. Rears are 18 x 12 with 50 mm offset and 335/30/18 tires. I'm not real positive about the offsets. I also used a 5/16" spacer on the rear wheels. I had to change to longer ARP studs to make the rears work with the spacers. The fronts don't have spacers but some day I'll change those to longer studs also. The wheels have a thicker center section than the stock wheels so without longer studs on the front, I had to use the nuts with the threaded portion that go into the holes in the wheels.

01-25-2009	#10
1991ZR1 Join Date: Sep 2005 Posts: 90	Re: Aftermarket wheel thread. I like the simple design of these wheels. I had a hard time choosing between these and Fikse FM5. I also had a hard time choosing the finish. I ended up going with the polished finish. These are HRE 445R. Fronts are 18 x 10 with 56 mm offset and 275/35/18 tires. Rears are 18 x 12 with 50 mm offset and 335/30/18 tires. I'm not real positive about the offsets. I also used a 5/16" spacer on the rear wheels. I had to change to longer ARP studs to make the rears work with the spacers. The fronts don't have spacers but some day I'll change those to longer studs also. The wheels have a thicker center section than the stock wheels so without longer studs on the front, I had to use the nuts with the threaded portion that go into the holes in the wheels.