Re: Clutch Pressure Plate Bolts
rhipsher: The only correct option at present is the bolts Ron Woods makes.
http://www.zr1products.com/products.html
Jeff: Right on about buying the LT1/4 bolts!
New flywheel/threads, proper use of thread lock compound, correct bolt tightening sequence & torque certainly reduces the liklihood of failure. You know & practice proper technique. Not everyone does. Those are the fellow ZR-1ers we are concerned about. Thanks for chiming in on this thread.
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
Last edited by A26B; 04-11-2009 at 06:29 PM.
|