ZR-1 Net Registry Forums - View Single Post

07-01-2009

Andrew, the gauge is not a linear representation of how hot things are getting. Go into the diagnostic mode on the AC controller by holding both fan speed up and down buttons for 5 seconds, release and -00- should show, use either the up and down button again ad go to -16-. Hit the auto buttun for fan speed. That will give you the coolant temp in C.

07-01-2009	#10
Jeffvette Guest Posts: n/a	Re: Cooling system bubble? Andrew, the gauge is not a linear representation of how hot things are getting. Go into the diagnostic mode on the AC controller by holding both fan speed up and down buttons for 5 seconds, release and -00- should show, use either the up and down button again ad go to -16-. Hit the auto buttun for fan speed. That will give you the coolant temp in C.