ZR-1 Net Registry Forums - View Single Post

tomtom72 · 01-27-2006

If you can get some 3M General Purpose Adheasive Remover, 3M/GPAR, it will make removing the old 3M yellow an easier task...it will still take alot of time because the yellow is always soft and smears easily...need plenty of rags! It's kind of like doing the clean up after doing tile grout...one pass & then use a clean side and another pass...no rubbing back & forth or else you just spread & smear it all over the place.

Tom

01-27-2006	#14
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,609	Re: Rear window If you can get some 3M General Purpose Adheasive Remover, 3M/GPAR, it will make removing the old 3M yellow an easier task...it will still take alot of time because the yellow is always soft and smears easily...need plenty of rags! It's kind of like doing the clean up after doing tile grout...one pass & then use a clean side and another pass...no rubbing back & forth or else you just spread & smear it all over the place. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member