ZR-1 Net Registry Forums - View Single Post

ZR1FUN · 01-08-2010

It is about time to get the Z going again. It needs the clutch hydralic system overhauled.

As a starting point I identified the two cylinders needed at NAPA Online. Will the below items work on my 94 Z? If not where do I go to get them?

NAPA Clutch Slave Cylinder â€“ Part No NNC360017

NAPA Clutch Master Cylinder â€“ Part No NNC39763

Also, I looked thru the ZR1 parts manual I did not see any gaskets of any kind needed to do this other than some teflon tape for the pipe threads. Did I miss any gaskets, sealers or lock tight treatments that are recommended.

I plan on using either Prestone DOT 4 sythetic or Motel 600 on the fill.

Comments? Suggestions?

Doug
ZR1FUN

PS: The NAPA Online price versus the local store price was about $25 cheaper each.

01-08-2010	#1
ZR1FUN Join Date: Sep 2006 Location: Olympia Posts: 161	NAPA Clutch Mst & Slave Cylinder It is about time to get the Z going again. It needs the clutch hydralic system overhauled. As a starting point I identified the two cylinders needed at NAPA Online. Will the below items work on my 94 Z? If not where do I go to get them? NAPA Clutch Slave Cylinder â€“ Part No NNC360017 NAPA Clutch Master Cylinder â€“ Part No NNC39763 Also, I looked thru the ZR1 parts manual I did not see any gaskets of any kind needed to do this other than some teflon tape for the pipe threads. Did I miss any gaskets, sealers or lock tight treatments that are recommended. I plan on using either Prestone DOT 4 sythetic or Motel 600 on the fill. Comments? Suggestions? Doug ZR1FUN PS: The NAPA Online price versus the local store price was about $25 cheaper each.