Quote:
Originally Posted by WB9MCW
OK good info we are half way there now.
Next time you have the Z in the air (or if the rods are still off just do a bench photo) take a pic of the inner tie rod ends and maybe hold your special tool up to show how it fit nice and made the job easy. Exactly 
Post the pics here.....
Then we will PM Dyno and have him add this post to his list. |
I added this thread to
http://www.zr1.net/forum/showpost.ph...72&postcount=2 a day ago (
STEERING) when I seen "Replacing both inner and outer tie rod ends instantly
cut down on the vibration by at least 60%".
What vibration I am not sure but I am assuming wheels are a bit out of balance
rhipsher.......thanks for the information
If you are adding some pictures just insert them in your first post so all your information is right up front
