ZR-1 Net Registry Forums - View Single Post

LGAFF · 06-19-2010

This one makes it go pretty quick:

I use these to get to harder to reach spots, the long shank I only use on an air compressor driven tool, as at high RPM it whips.

I use a cheap Harbor Freight Grinder and a small air grinder

Finishing is done with a 1" X 1" flap wheel 90 or 120 grit

06-19-2010	#4
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: Stage 1 Porting This one makes it go pretty quick: I use these to get to harder to reach spots, the long shank I only use on an air compressor driven tool, as at high RPM it whips. I use a cheap Harbor Freight Grinder and a small air grinder Finishing is done with a 1" X 1" flap wheel 90 or 120 grit __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 06-19-2010 at 10:54 PM.