[shanker]

Pete,
The ignition can be set up using 4 Bosch type ignition modules (one for each coil pack). They are small and inexpensive. The Autronic ECU has 4 ignition outputs which will tell each module when to charge and fire the respective coil packs. These 4 Bosch modules are small enough to mount under the intake.


The Autronic ECU can control 16 seperate injectors. I will be running the primary injectors full time, and the secondary injectors will be disabled at idle, and kick in at 1% throttle.

Of course, this is all easier said than done!