![]() |
#1 |
![]() Join Date: Aug 2019
Location: Portland, Oregon
Posts: 10
|
![]()
Hi All,
Looking for a LT-5/LT-1 mechanic/specialists in the Portland, Oregon area. Any ideas? Thanks, Bob |
![]() |
![]() |
![]() |
#2 |
Join Date: Oct 2004
Location: Folsom CA
Posts: 1,663
|
![]()
LT1, likely plenty. check your local Chevy dealer, or pretty much any restoration shop.
LT5, uhh...nope. Used to be a guy just across the border in Washington, but he evaporated long ago. There are a small handful of LT5 pros out there, Marc Haibec, Cory Henderson, Bill Budreau, Graham Behan, to name a few. Good luck. Crabs |
![]() |
![]() |
![]() |
#3 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,686
|
![]()
You forgot Pete (Dr.Greekenstein) in DesPlaines, IL.
|
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Aug 2019
Location: Portland, Oregon
Posts: 10
|
![]()
Thanks for the info. I am working with the local Chevrolet dealer. I have an issue with my '94 LT1 and was looking for another set of eyes on the problem.
I am aware of the fellow in Vancouver, Wash. Tom Wong Performance Engineering. He no longer works on the old Vettes. Very hard to make contact with. Again Thanks, Bob |
![]() |
![]() |
![]() |
#5 |
![]() ![]() Join Date: Jul 2016
Location: Harrodsburg, KY
Posts: 481
|
![]()
Dave Perry is very talented and knowledgeable with both. He is south of you in CA.
|
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Aug 2019
Location: Portland, Oregon
Posts: 10
|
![]()
Thanks for the info. Any idea where in Calif? Thanks, Bob
|
![]() |
![]() |
![]() |
#7 |
![]() ![]() Join Date: Jul 2016
Location: Harrodsburg, KY
Posts: 481
|
![]()
I know he is in SoCal. I can send you his phone number, if you wish.
|
![]() |
![]() |
![]() |
#8 |
Join Date: Jan 2019
Location: Seattle
Posts: 62
|
![]()
The guys at corvettes of auburn (in Washington tho) seem to know the lt5. They couldn?t solve my issue, but it was a pretty tricky problem (heat related intermittent ecu failure).
|
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Feb 2023
Location: Albany, OR
Posts: 40
|
![]()
You might try Tom Wong in Vancouver, WA. Can be hard to reach, but keep trying or stop by if you can.
|
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Aug 2019
Location: Portland, Oregon
Posts: 10
|
![]()
I finally made contact with Tom Wong and he no longer works on older Vettes.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|