Next! Top End Touchup - ZR-1 Net Registry Forums

XfireZ51 · 03-10-2012

Now that the front suspension has been rebuilt and re-assembled, I dropped the old oil and some coolant while the car is still on jack stands.
I am going to get the plenum and IH's repainted. While off, I thought I would measure the head ports from GVDs porting. Borrowed a snap guage from Pete and I will be measuring ports at 3 different points, valve bowl entry, secondary throttle plate(where they were), and top. Meantime, I've measured the IH and plenum porting job I did nearly 3 years ago and found it needs to be re-done somewhat. The ports are not as uniform as they should be at 36mm. I almost finished one IH in about 2.5hrs. Ball rolls thru the ports now. One more port to go. Mostly touch up but the ports are looking more uniform. PAssenger side looks like it needs more attention than D/S. Maybe I'll have both IHs done this weekend. Once the porting is done, the plenum and IHs go to the stripper to remove paint and then they get re-painted to visually complement the cam covers.

Blue Flame Restorations · 03-10-2012

Sounds like another good project. Can't wait to see the new paint in person, at Marc's next month.

XfireZ51 · 03-10-2012

Brett,

I'll try but its gonna be tight. Should be interesting to see how the extra airflow will affect the tune.

Blue Flame Restorations · 03-10-2012

What color(s) are you going with this time???

XfireZ51 · 03-10-2012

Quote:

Originally Posted by Blue Flame Restorations

What color(s) are you going with this time???

Going w silver for top end with red lettering and plenum inset. I'll also use red
ZR-1 splash emblem on air horn.

Blue Flame Restorations · 03-10-2012

Quote:

Originally Posted by XfireZ51

Going w silver for top end with red lettering and plenum inset. I'll also use red
ZR-1 splash emblem on air horn.

I'm doing very similar. Stock silver for all with Carter's LT5 coolant pipes and stainless bolts. I like the ZR-1 splash on the air horn.

rhipsher · 03-10-2012

Dom you should paint the top end camo. That would look tough.

XfireZ51 · 03-10-2012

Quote:

Originally Posted by rhipsher

Dom you should paint the top end camo. That would look tough.

Maybe a stealth or cloaking paint so nobody can see it

rhipsher · 03-10-2012

Quote:

Originally Posted by XfireZ51

Maybe a stealth or cloaking paint so nobody can see it

And when people ask well how does it run with no engine just point to your head and say mental telepathy.

mike100 · 03-10-2012

touching up those ports is a lot easier than starting from square one...should actually be enjoyable.

03-10-2012	#1
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Next! Top End Touchup Now that the front suspension has been rebuilt and re-assembled, I dropped the old oil and some coolant while the car is still on jack stands. I am going to get the plenum and IH's repainted. While off, I thought I would measure the head ports from GVDs porting. Borrowed a snap guage from Pete and I will be measuring ports at 3 different points, valve bowl entry, secondary throttle plate(where they were), and top. Meantime, I've measured the IH and plenum porting job I did nearly 3 years ago and found it needs to be re-done somewhat. The ports are not as uniform as they should be at 36mm. I almost finished one IH in about 2.5hrs. Ball rolls thru the ports now. One more port to go. Mostly touch up but the ports are looking more uniform. PAssenger side looks like it needs more attention than D/S. Maybe I'll have both IHs done this weekend. Once the porting is done, the plenum and IHs go to the stripper to remove paint and then they get re-painted to visually complement the cam covers. Last edited by XfireZ51; 03-10-2012 at 12:53 AM.

03-10-2012	#2
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,899	Re: Next! Top End Touchup Sounds like another good project. Can't wait to see the new paint in person, at Marc's next month. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project

03-10-2012	#3
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Re: Next! Top End Touchup Brett, I'll try but its gonna be tight. Should be interesting to see how the extra airflow will affect the tune.

03-10-2012	#4
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,899	Re: Next! Top End Touchup What color(s) are you going with this time??? __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project

03-10-2012	#7
rhipsher Join Date: Aug 2008 Location: Houston, TX Posts: 2,314	Re: Next! Top End Touchup Dom you should paint the top end camo. That would look tough.

03-10-2012	#10
mike100 Join Date: Feb 2011 Location: San Marcos CA Posts: 1,786	Re: Next! Top End Touchup touching up those ports is a lot easier than starting from square one...should actually be enjoyable.