Cam Cover R&R Questions (Refresher) - ZR-1 Net Registry Forums

-=Jeff=- · 02-27-2016

It has been a bunch of years since doing this..

I have one cover off as i need to replace the breather filters in them

Anaerobic sealer, it is applied to the perimeter only?

I have both surfaces clean and I am ready to install the covers.. do I put oil or engine lube on the bearing surfaces of the cover prior to install?

Cover end plugs.. install them on the head then let the cam cover get placed over them?

Thanks

02-27-2016	#1
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,165	Cam Cover R&R Questions (Refresher) It has been a bunch of years since doing this.. I have one cover off as i need to replace the breather filters in them Anaerobic sealer, it is applied to the perimeter only? I have both surfaces clean and I am ready to install the covers.. do I put oil or engine lube on the bearing surfaces of the cover prior to install? Cover end plugs.. install them on the head then let the cam cover get placed over them? Thanks __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode