Set of B&B TriFlow TIPS ONLY - ZR-1 Net Registry Forums

VetteMed · 02-16-2011

Set of Tips, removed from a B&B system, for those of you who like the look but don't want the whole system. Was going to install these but have put that on hold, and could use the cash.

$250 shipped for the set.

GOLDCYLON · 02-16-2011

Id love to do this but am unsure if they would fit right on the back end of the Corsas. I think the B&B tips are the best looking tips out there and fill out the rear cutout the best of all the systems out there. How do the tops of these tips look? and dings, dents and scatches? I know the atomic Z did this already so I may need to ask Dennis for input. Are you firm on this price Andrew?

VetteMed · 02-16-2011

I actually think I MAY not sell these, I was looking at them again and think I'd like to try to figure out a way to make 'em work. My exhaust guy didn't want to mess with them but I think if I hack them up a little I can get him to work with them. Will post followup.

xlr8nflorida · 02-16-2011

Quote:

Originally Posted by VetteMed

I actually think I MAY not sell these, I was looking at them again and think I'd like to try to figure out a way to make 'em work. My exhaust guy didn't want to mess with them but I think if I hack them up a little I can get him to work with them. Will post followup.

For whats it worth, If you are not going keep them, they would be worth the most $$ in 1 piece. I think once you chop them up, they lose value.

Check out the links I sent you, I think you will be impressed.

VetteMed · 02-16-2011

Yeah, I know they'll be nearly worthless if chopped up, but I'm going to give it a try. What's the worst that can happen

GOLDCYLON · 02-16-2011

Quote:

Originally Posted by VetteMed

I actually think I MAY not sell these, I was looking at them again and think I'd like to try to figure out a way to make 'em work. My exhaust guy didn't want to mess with them but I think if I hack them up a little I can get him to work with them. Will post followup.

Cool keep em but Im not sure what BB setup that is but those tips with those pipe angles look nothing like the B&B triflows I took of my car originally. I understand the welders hesitation due to the offangles vs the straight pipes of our system. Whatever is done the cuts will be very near the backside of the ovals and extend rearward. Still love that oval look however

A1990 · 02-17-2011

Actually I have a B&B system, not just the tips. I was always curious if the tips would bolt up to a Corsa.

GOLDCYLON · 02-17-2011

Quote:

Originally Posted by A1990

Actually I have a B&B system, not just the tips. I was always curious if the tips would bolt up to a Corsa.

Sorry Dennis I thought it was a Corsa with B&B tips. Dont know who told me that. Oh well cleared up now

VetteMed · 02-17-2011

I think these tips may have come from an f-body system, with the wacky crossflow single muffler setup... that would explain the splitter setup.

GOLDCYLON · 02-25-2011

Hows this mod coming Andrew?

02-16-2011	#1
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,816	Set of B&B TriFlow TIPS ONLY Set of Tips, removed from a B&B system, for those of you who like the look but don't want the whole system. Was going to install these but have put that on hold, and could use the cash. $250 shipped for the set. Last edited by VetteMed; 02-16-2011 at 10:34 AM.

02-16-2011	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: Set of B&B TriFlow TIPS ONLY Id love to do this but am unsure if they would fit right on the back end of the Corsas. I think the B&B tips are the best looking tips out there and fill out the rear cutout the best of all the systems out there. How do the tops of these tips look? and dings, dents and scatches? I know the atomic Z did this already so I may need to ask Dennis for input. Are you firm on this price Andrew? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

02-16-2011	#3
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,816	Re: Set of B&B TriFlow TIPS ONLY I actually think I MAY not sell these, I was looking at them again and think I'd like to try to figure out a way to make 'em work. My exhaust guy didn't want to mess with them but I think if I hack them up a little I can get him to work with them. Will post followup.

02-16-2011	#5
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,816	Re: Set of B&B TriFlow TIPS ONLY Yeah, I know they'll be nearly worthless if chopped up, but I'm going to give it a try. What's the worst that can happen

02-17-2011	#7
A1990 Join Date: Dec 2003 Location: Grand Island NE Posts: 1,512	Re: Set of B&B TriFlow TIPS ONLY Actually I have a B&B system, not just the tips. I was always curious if the tips would bolt up to a Corsa. __________________ Dennis Fierstein 90 ZR-1 #2562 Atomic-Z ZR-1 Net Registry Chairman of the Board ZR-1 Net Registry Treasurer

02-25-2011	#10
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: Set of B&B TriFlow TIPS ONLY Hows this mod coming Andrew? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V