10 PSI dyno numbers are in... - ZR-1 Net Registry Forums

RHanselman · 05-02-2008

OK here are the 10 psi numbers. We did two back to back and they were within decimals...

616.56 rwhp & 574.97 rwtq

We didn't get a chance to put the high flow pumps in so we stopped while we still had fuel. We'll change the pumps after BG and push her up a few pounds

I want to give special thanks to the following:

Jerry Downey... without him this would not have happened!
Ron Woods
Marc Haibeck
Aaron Scott
Corey Henderson
Gil Nevarez Racing Products (his experience with race applications/mult ovhd cam eng builds/and tuning)

05-02-2008

Looks good Ron. Can we get a graph mapping RPM instead of MPH?

XfireZ51 · 05-02-2008

616 at the rear???!!!! WOW!!!!

WB9MCW · 05-03-2008

VERY NICE GOOD JOB INDEED

tomtom72 · 05-03-2008

God bless you! Wow....just wow is all I can think to say on a motor that isn't 100% sorted out yet.

I hope no one that has ordered a new ZR1 has seen this Ron.

Hummmm...lets see, new '09/ ZR1 about 125k out the door.....maybe?

an antique push rod free LT5 in say a fairly low milage, clean ZR-1, say a '90 = around 25k and add your fix to that and by my math you're under a 100k...waaay under 100k total $ spent!

Tom

GOLDCYLON · 05-03-2008

Most impressive

32valvZ · 05-03-2008

Soam Beetch! Nice. Great results

IowaZR-1 · 05-03-2008

Sweet!!!!! let the fun begin!

GrayZ · 05-03-2008

Awesome! i'm gonna tell SAnta CLaus what i want for Chirstmas.

Z Factor · 05-03-2008

Keep us posted on the future results.

05-02-2008	#1
RHanselman Join Date: Jul 2005 Location: Cresson, TX Posts: 970	10 PSI dyno numbers are in... OK here are the 10 psi numbers. We did two back to back and they were within decimals... 616.56 rwhp & 574.97 rwtq We didn't get a chance to put the high flow pumps in so we stopped while we still had fuel. We'll change the pumps after BG and push her up a few pounds I want to give special thanks to the following: Jerry Downey... without him this would not have happened! Ron Woods Marc Haibeck Aaron Scott Corey Henderson Gil Nevarez Racing Products (his experience with race applications/mult ovhd cam eng builds/and tuning) __________________ Ron Hanselman Founding Member #80 CM Lifetime Member #1093 1991 #383 Twin Turbo 1993 #099 Ruby, Jeal 368 w/Snake Skinner body 1961 White with Red Int Last edited by RHanselman; 05-03-2008 at 07:39 AM.

05-02-2008	#2
Jeffvette Guest Posts: n/a	Re: 10 PSI dyno numbers are in... Looks good Ron. Can we get a graph mapping RPM instead of MPH?

05-02-2008	#3
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Re: 10 PSI dyno numbers are in... 616 at the rear???!!!! WOW!!!!

05-03-2008	#4
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,584	Re: 10 PSI dyno numbers are in... VERY NICE GOOD JOB INDEED

05-03-2008	#5
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,609	Re: 10 PSI dyno numbers are in... God bless you! Wow....just wow is all I can think to say on a motor that isn't 100% sorted out yet. I hope no one that has ordered a new ZR1 has seen this Ron. Hummmm...lets see, new '09/ ZR1 about 125k out the door.....maybe? an antique push rod free LT5 in say a fairly low milage, clean ZR-1, say a '90 = around 25k and add your fix to that and by my math you're under a 100k...waaay under 100k total $ spent! Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

05-03-2008	#6
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,119	Re: 10 PSI dyno numbers are in... Most impressive __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

05-03-2008	#7
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,061	Re: 10 PSI dyno numbers are in... Soam Beetch! Nice. Great results

05-03-2008	#8
IowaZR-1 Join Date: Feb 2006 Location: Iowa aka "one big cornfield" Posts: 339	Re: 10 PSI dyno numbers are in... Sweet!!!!! let the fun begin!

05-03-2008	#9
GrayZ Join Date: Mar 2006 Location: Innsbrook, Missouri Posts: 1,720	Re: 10 PSI dyno numbers are in... Awesome! i'm gonna tell SAnta CLaus what i want for Chirstmas.

05-03-2008	#10
Z Factor Join Date: Dec 2003 Location: S. Florida Posts: 2,647	Re: 10 PSI dyno numbers are in... Keep us posted on the future results.