SS Braided Oil Cooler Line

[Fully Vetted]

Originally Posted by secondchance

Aluminum plate was Cadded using factory piece then modified to accept M16X1.5 fitting to accept AN 10 fitting. Then the pieces were black anodized.

I will post installed pic tomorrow.

Any chance we could choose a different color other than black or due to the location is black really the only color that makes sense?

[secondchance]

Originally Posted by Fully Vetted

Any chance we could choose a different color other than black or due to the location is black really the only color that makes sense?

Sorry! They are all black anodized.

[Dynomite]

Are you sure those two fittings are not 10 AN/M18x1.5 ?

Originally Posted by secondchance

Aluminum plate was Cadded using factory piece then modified to accept M16X1.5 fitting to accept AN 10 fitting. Then the pieces were black anodized.

[secondchance]

Originally Posted by Dynomite

Are you sure those two fittings are not 10 AN/M18x1.5 ?

Thsy are M16x1.5s. I bought a few already.

[secondchance]

Originally Posted by Dynomite

Are you sure those two fittings are not 10 AN/M18x1.5 ?



1. Use two 10 AN Stainless Steel Braided hose.
2. Use two AQP Hose, 90 Degree, -10 AN Hose to Female -10 AN, Aluminum, Nickel Plated.
3. Use two AQP Hose, 45 Degree, -10 AN Hose to Female -10 AN, Aluminum, Nickel Plated.
4. Use two 10 AN M18x1.5 fittings threaded into the Aluminum adapter manifold with "0"rings.
5. One 6mm x 1.0 x 35 mm SS Allen head bolt.
6. One 6 mm SS washer.
7. Two "O" rings for the Aluminum adapter manifold to oil cooler interface.

The first four items can be found at Summit Racing.

Dynomite,

May be it was M18... My memory isn't what it use to be. If so, I'll have to return and order new.
Did I send you that pic?

[DaveK]

That looks great Yun. Very nice. Interested once I'm back in work.

Cheers

Dave

[94Admiral]

Yun -

I'd like one set if available please. Thanks!

Scott

[secondchance]

So far I have;

Robert DeMarco - 2
DaveK - possible - 1
Fully Vetted - 1
94 Admiral - 1
4DSZR1 - 1

I am going to order materials tomorrow and go into production next week.

[1991ZR1]

Please add me to the list.

[secondchance]

So far I have;

Robert DeMarco - 2
DaveK - possible - 1
Fully Vetted - 1
94 Admiral - 1
4DSZR1 - 1
1991ZR1 - 1