Radiator shroud - ZR-1 Net Registry Forums

hiperf406 · 11-09-2009

I know search is my friend but I can't find a Teck posting on radiator shroud removal. I want to inspect my rad for debris but can't get shroud off taken out all bolts I can see but I'm sure I missed some. Thanks lorne #1748

GOLDCYLON · 11-09-2009

Two bolts are reached from the underside of the car only. Another two above these next to the headlight bucket areas. If you havent ventured into these regions. NLT 4bolts remain.

Another White ZR-1 in AZ ? Surprised we havent met yet. GC

hiperf406 · 11-09-2009

I moved my ZR1 down to Az last year & am here for winter. I'm trying to get out to some functions to meet others. Plan on going on ACES cruise this Sat - are you planning on going. I have the shroud loose but can't lift from car as oil cooler & A/C lines are in way. Do I have to disc both or just the oil cooler?
lorne #1748

11-09-2009

Quote:

Originally Posted by hiperf406

I moved my ZR1 down to Az last year & am here for winter. I'm trying to get out to some functions to meet others. Plan on going on ACES cruise this Sat - are you planning on going. I have the shroud loose but can't lift from car as oil cooler & A/C lines are in way. Do I have to disc both or just the oil cooler?
lorne #1748

Some cars you can flex the shroud around the lines. Some people just cut the shroud as the portion of the tab that makes life rough is not needed.

QB93Z · 11-09-2009

I have gotten the shroud off and back on two different ZR-1's ('90, '93). I didn't have to cut or trim anything, although it seems to be a brutal process.

Lift the passenger side off first. Use a small pry tool to get the lower edge past the oil and AC lines. Then you should be able to flex it and get the drivers side off.

Good luck. It is a bear to do but it can be done.

Jim

PhillipsLT5 · 11-09-2009

Lorne, where & when is ACE Cruise Sat
GC, you missed it 3 ZR-1 at Pavillion on SAT, tell Lorne about the stock Radiator & where to get it ,You back in town?

11-09-2009	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: Radiator shroud Two bolts are reached from the underside of the car only. Another two above these next to the headlight bucket areas. If you havent ventured into these regions. NLT 4bolts remain. Another White ZR-1 in AZ ? Surprised we havent met yet. GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

11-09-2009	#3
hiperf406 Join Date: Apr 2007 Location: Spruce Grove Oilberta/In Mex for winter Posts: 1,045	Re: Radiator shroud I moved my ZR1 down to Az last year & am here for winter. I'm trying to get out to some functions to meet others. Plan on going on ACES cruise this Sat - are you planning on going. I have the shroud loose but can't lift from car as oil cooler & A/C lines are in way. Do I have to disc both or just the oil cooler? lorne #1748 __________________ lorne # 1748 Stock except for a modified Corsa exhaust. When the flag drops the bull sh1t stops!

11-09-2009	#5
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,684	Re: Radiator shroud I have gotten the shroud off and back on two different ZR-1's ('90, '93). I didn't have to cut or trim anything, although it seems to be a brutal process. Lift the passenger side off first. Use a small pry tool to get the lower edge past the oil and AC lines. Then you should be able to flex it and get the drivers side off. Good luck. It is a bear to do but it can be done. Jim

11-09-2009	#6
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,446	Re: Radiator shroud Lorne, where & when is ACE Cruise Sat GC, you missed it 3 ZR-1 at Pavillion on SAT, tell Lorne about the stock Radiator & where to get it ,You back in town?

11-09-2009	#1
hiperf406 Join Date: Apr 2007 Location: Spruce Grove Oilberta/In Mex for winter Posts: 1,045	Radiator shroud I know search is my friend but I can't find a Teck posting on radiator shroud removal. I want to inspect my rad for debris but can't get shroud off taken out all bolts I can see but I'm sure I missed some. Thanks lorne #1748 __________________ lorne # 1748 Stock except for a modified Corsa exhaust. When the flag drops the bull sh1t stops!