|
|
|
03-01-2015
|
#1 |
 Join Date: Apr 2007
Location: OHio
Posts: 44
|
NOS plenum and original exhaust
Corvette ZR1 ZR-1 LT5 Plenum that has never been on an engine. I had this for years as a spare for my 1991 ZR1 but I no longer have the car. I bought this from the GM proving grounds years ago. $350 + shipping
[SIZE=2][FONT=Arial]Original LT5 ZR1 exhaust removed when the car has less than 5,000 miles on it for aftermarket exhaust. This was removed from a 1991 ZR1. One piece undamaged exhaust from the front to the back. It has been stored in my garage for years. This is the exhaust you need especially if you are doing any NCRS judging with your car. $400. You will have to pick up this or Both sold. Last edited by Dean; 04-13-2015 at 09:13 AM. |
|
|
|
03-02-2015
|
#2 |
 Join Date: May 2011
Location: Sydney, Australia
Posts: 2,466
|
Re: NOS plenum and original exhaust
Dean, I will take the plenum. How do you want payment.
|
|
|
|
|
03-04-2015
|
#3 |
|
Join Date: Apr 2007
Location: OHio
Posts: 44
|
Re: NOS plenum and original exhaust
I was told this is the secondary throttle solenoid. Still for sale $50.00. Brand new.
Still available 3/16/15 Last edited by Dean; 03-16-2015 at 10:57 AM. |
|
|
|
|
03-04-2015
|
#4 |
|
Join Date: Apr 2007
Location: OHio
Posts: 44
|
Re: NOS plenum and original exhaust
more parts
New Red Seat belts both side together $200 Oil plug gasket $2.00 sold GM muffler clamps that were on the exhaust of a 1991 ZR1 $5.00 sold Seat Belts still available 3/16/15! Last edited by Dean; 03-16-2015 at 10:58 AM. |
|
|
|
|
03-04-2015
|
#5 |
|
Join Date: Apr 2007
Location: OHio
Posts: 44
|
Re: NOS plenum and original exhaust
brand new fuel railings with eight new injectors still in the plastic case they were shipped in for GM $200.00 sold
throttle body gasket new $10.00 Throttle body gasket still available 3/16/15 Last edited by Dean; 03-16-2015 at 10:58 AM. |
|
|
|
|
03-04-2015
|
#6 |
|
Join Date: Apr 2007
Location: OHio
Posts: 44
|
Re: NOS plenum and original exhaust
air dam and sold.
Last edited by Dean; 03-06-2015 at 07:18 PM. |
|
|
|
|
03-06-2015
|
#7 | |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,119
|
Re: NOS plenum and original exhaust
Quote:
Secondary throttle solenoid
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
03-06-2015
|
#8 |
|
Join Date: Apr 2007
Location: OHio
Posts: 44
|
Re: NOS plenum and original exhaust
Brand new power switch model with two new keys and knock outs. This is brand new and never been opened. $300.00
Original computer chip from a low mile 1991 ZR1 $75.00 sold NOS power switch and (2) new keys sold Last edited by Dean; 04-13-2015 at 09:13 AM. |
|
|
|
|
03-06-2015
|
#9 | |
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,816
|
Re: NOS plenum and original exhaust
Quote:
And I will take the Fuel Rails if Daryll runs out of money  Daryll.....you cannot buy a House with six car garage and have any money left over for Fuel Rails  I just had an emergency yesterday and installed my last Fuel Rail under the portable Flood Lights last night to get one of our guys ZR1 running. Did a 12 minute Plenum Removal after dark under flood lights with NO Injector Housing Coolant Blocked. It took a couple hours to put it back together and fire it up (did some house cleaning under the Plenum). Idled and ran perfectly. Never seen a tighter Secondary Vacuum System....vacuum pump came on for a few seconds and did not hear it again 
__________________
Clickable links  On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 03-06-2015 at 10:39 PM. |
|
|
|
|
|
03-04-2015
|
#10 |
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,651
|
Re: NOS plenum and original exhaust
I'll take the three pcv tubes, oil pressure sender, two injector relays
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
 |
|
|
Hybrid Mode
