Which injectors to choose - ZR-1 Net Registry Forums

stedi · 05-04-2009

Any suggestions for injector replacement if I do not want to spend a fortune but still want to keep original performance or better.

Thanks,
Steve

jonszr1 · 05-04-2009

i have used the ficinjectors , jon and his son own the business and are a pleasure to deal with very standup guys . these are rebuilt bosch injectors which are flow matched and come with a 3 year warrenty. price aprox 400 to your door . i have them on both my zr1s and seem to exceed the performance of the stk ones . jmho

lbszr · 05-04-2009

Accel's are good also, mine are two years old and happen to just have a pressure guage on them today and they hold over 40psi for over a hour after shutdown still, knock on wood.

GOLDCYLON · 05-05-2009

Cost being key the above two mentioned (Accel and FIC) a lot of folks have had success with those. Folks have been using the accels for about two years now and the FICs for about a year.

If money was no object RCs injectors. According to Jeffvette a valued member on the board they are a install and forget item as they are stainless sleeved. I am running Rcs and I have zero complaints.

tomtom72 · 05-05-2009

This is just two more cents fwiw.

I have RC's in my 90, bought them way back in 05 when they and GM were the only choice. So the RC's were logical as their cost was ball park with GM injectors as they are s/s where it counts.

I would urge you to go to FIC injectors' website as they have some very interesting vids of all the popular injectors in operation. You get to see the spray patterns at different PSI's. Go watch the vids and I think after you will have more info with which to make your choice.

Tom

vettn71 · 05-05-2009

If yours is an NCRS-type car, Jon at FIC made up some 94(?) Multecs w/stainless steel guts for my 90. I was concerned about losing points for the green bodies of the Bosch. I haven't installed them yet (waiting for other parts), but they look spot on to the originals. As stated earlier, Jon answers the phone, is always willing to talk and work towards whatever you need. if these work out as well as I think they will, restorers will have a new option that won't cost them a bucket of points.

Jim

ZR1Vette · 05-05-2009

I went with FIC and am very pleased I did...
-Pricing for 16 flow matched Bosch injectors is extremely good as opposed to costs for some of the other manufacturers
-Jon Banner (owner of FIC) is excellent to work with...he even followed up with several telephone calls to me just to make sure everything was OK and no problems with installs
-Injectors delivered in vacuum sealed packaging

Injectors are a plug and play set up...
Bosch units:

The Accels... you will have to grind down the little tabs where the electrical connectors clip on...not a big deal to do>>

And if you are going to do the injector replacement don't forget O rings (for primary) and plenum gaskets...I got mine form Jerry>>

The primary O ring is located in the injector housing and should be replaced prior to installing new injectors

Just my personal preference for FIC sourced injectors...and they work great....my ZR purrs like a kitten

LGAFF · 05-05-2009

WAs there an issue with FICs and if so has it been resolved?

ZR1Vette · 05-05-2009

None with me...did hear of one ZR driver but I think he had a modified engine

XfireZ51 · 05-05-2009

=Jeff= has had some
issues with the FICs in the last several days. If he hasn't posted yet, I'll leave it up to him to discuss how he has resolved it. Remember he's using 2nd Gen IHs, so his injectors are the same for primary and secondary.

05-04-2009	#1
stedi Join Date: Sep 2005 Location: Montreal, qc, Canada Posts: 13	Which injectors to choose Any suggestions for injector replacement if I do not want to spend a fortune but still want to keep original performance or better. Thanks, Steve

05-04-2009	#2
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,406	Re: Which injectors to choose i have used the ficinjectors , jon and his son own the business and are a pleasure to deal with very standup guys . these are rebuilt bosch injectors which are flow matched and come with a 3 year warrenty. price aprox 400 to your door . i have them on both my zr1s and seem to exceed the performance of the stk ones . jmho

05-04-2009	#3
lbszr Join Date: Nov 2006 Location: dayton,ohio Posts: 424	Re: Which injectors to choose Accel's are good also, mine are two years old and happen to just have a pressure guage on them today and they hold over 40psi for over a hour after shutdown still, knock on wood.

05-05-2009	#4
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,119	Re: Which injectors to choose Cost being key the above two mentioned (Accel and FIC) a lot of folks have had success with those. Folks have been using the accels for about two years now and the FICs for about a year. If money was no object RCs injectors. According to Jeffvette a valued member on the board they are a install and forget item as they are stainless sleeved. I am running Rcs and I have zero complaints. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 05-05-2009 at 08:38 AM.

05-05-2009	#5
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,609	Re: Which injectors to choose This is just two more cents fwiw. I have RC's in my 90, bought them way back in 05 when they and GM were the only choice. So the RC's were logical as their cost was ball park with GM injectors as they are s/s where it counts. I would urge you to go to FIC injectors' website as they have some very interesting vids of all the popular injectors in operation. You get to see the spray patterns at different PSI's. Go watch the vids and I think after you will have more info with which to make your choice. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

05-05-2009	#6
vettn71 Join Date: Oct 2008 Location: Colleyville, TX Posts: 272	Re: Which injectors to choose If yours is an NCRS-type car, Jon at FIC made up some 94(?) Multecs w/stainless steel guts for my 90. I was concerned about losing points for the green bodies of the Bosch. I haven't installed them yet (waiting for other parts), but they look spot on to the originals. As stated earlier, Jon answers the phone, is always willing to talk and work towards whatever you need. if these work out as well as I think they will, restorers will have a new option that won't cost them a bucket of points. Jim

05-05-2009	#7
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 930	Re: Which injectors to choose I went with FIC and am very pleased I did... -Pricing for 16 flow matched Bosch injectors is extremely good as opposed to costs for some of the other manufacturers -Jon Banner (owner of FIC) is excellent to work with...he even followed up with several telephone calls to me just to make sure everything was OK and no problems with installs -Injectors delivered in vacuum sealed packaging Injectors are a plug and play set up... Bosch units: The Accels... you will have to grind down the little tabs where the electrical connectors clip on...not a big deal to do>> And if you are going to do the injector replacement don't forget O rings (for primary) and plenum gaskets...I got mine form Jerry>> The primary O ring is located in the injector housing and should be replaced prior to installing new injectors Just my personal preference for FIC sourced injectors...and they work great....my ZR purrs like a kitten Last edited by ZR1Vette; 05-06-2009 at 08:26 AM.

05-05-2009	#8
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: Which injectors to choose WAs there an issue with FICs and if so has it been resolved? __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

05-05-2009	#9
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 930	Re: Which injectors to choose None with me...did hear of one ZR driver but I think he had a modified engine

05-05-2009	#10
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Re: Which injectors to choose =Jeff= has had some issues with the FICs in the last several days. If he hasn't posted yet, I'll leave it up to him to discuss how he has resolved it. Remember he's using 2nd Gen IHs, so his injectors are the same for primary and secondary.