Transmission noise - DualMass or Throwout? - ZR-1 Net Registry Forums

S.hafsmo · 06-05-2018

Just a minor update on this issue. The tranny is off, and the pilot bearing has approx. 0.5-1mm play on the input shaft, compared to the new fluted bearing. The new one is not a tight fit per se, but has very little play. Minor marks on the outer diameter could indicate that it might have rotated a bit, but it's not very evident.
Everyting else seems to be in good condition.

06-05-2018	#21
S.hafsmo Join Date: Nov 2016 Location: Norway Posts: 397	Re: Transmission noise - DualMass or Throwout? Just a minor update on this issue. The tranny is off, and the pilot bearing has approx. 0.5-1mm play on the input shaft, compared to the new fluted bearing. The new one is not a tight fit per se, but has very little play. Minor marks on the outer diameter could indicate that it might have rotated a bit, but it's not very evident. Everyting else seems to be in good condition. __________________ - '90 ZR-1

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode