Switching out Seats

[Ccmano]

Originally Posted by Paul Workman

Again... if all you want is standard seats and (like me) you don't care about the lumbar bladder or bolster except to NOT have them cutting off circulation in your legs (I'm 6 foot, 240lbs), you're gonna love the standard 95 seats.

Believe me, remove the seat cushion to access the 4 bolt on the track. Remove them and disconnect the harness, and lift out the sport seat and replace them with the std seats and reinsert the 4 bolts holding the seat frame to the track. Install the bottom cushion to complete the swap and begin enjoying your std seats. (One of the best mods I've done on my 90 and my wife's 91 ZR-1s!

Paul,
How did you wire the seat? The only real problem I see is the control of the seat back angle. On the earlier sport seats it controlled with a switch on the bolster. I’m looking at this mod myself.
H