ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-03-2011   #10
VetteMed
 
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,816
Default Re: Motor mount swap questions

Quote:
Originally Posted by Ccmano View Post
Andrew,

Now that the mounts are in have you noticed any less engine/drive train noise inside the car? I've beed wanting to do this for a while on mine as I get an unusual amount of drivetrain noise inside the car. I'm thinking the mounts are collapsed and there is metal to metal contact somewhere.
Did the header to steering shaft clearance get any better?
H
Hans, I drove the car today, I can't say I noticed any appreciable difference in the sound or vibration inside the car - but admittedly it's been over a month since I drove it so I'm not sure if it helped. It did NOT help with my header clearance issue, so I'm rather frustrated about that. My #1 primary tube is still just a hair away from the steering shaft. Perhaps I need to try to shim up the motor mount with some large washers to gain some clearance.

-Andrew
VetteMed is offline  
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:19 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025