Need to replace injectors! - ZR-1 Net Registry Forums

Hib Halverson · 12-21-2011

There are many places on the Internet which sell injectors, both OE type and Bosch pintle type, at low prices.

If cost is the overriding concern, I'd search the I'net for some of those inexpensive source.

If you want the best injectors on the market, I'd go with RC Engineering.

Prior to putting in RCs in 1997, I had a few problems with stock injectors. In fact, I still have one that Russ Collins (The "RC" at RC Engineering" and I cut apart to find the guts rusted.

Now...14 years and 42,500 miles later and I still have the same set of 16 RC Engineering injectors. When I got them, I had RC flow test them while I watched. The flow difference over the set of 16 was 1.2% pretty impressive!

12-21-2011	#8
Hib Halverson Join Date: Jun 2005 Location: CenCoast California Posts: 898	Re: Need to replace injectors! There are many places on the Internet which sell injectors, both OE type and Bosch pintle type, at low prices. If cost is the overriding concern, I'd search the I'net for some of those inexpensive source. If you want the best injectors on the market, I'd go with RC Engineering. Prior to putting in RCs in 1997, I had a few problems with stock injectors. In fact, I still have one that Russ Collins (The "RC" at RC Engineering" and I cut apart to find the guts rusted. Now...14 years and 42,500 miles later and I still have the same set of 16 RC Engineering injectors. When I got them, I had RC flow test them while I watched. The flow difference over the set of 16 was 1.2% pretty impressive! __________________ Hib Halverson Technical Writer former owner 95 VIN 0140 current owner 19 VIN 1878