ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-24-2006   #9
petefias
 
Join Date: Aug 2005
Location: Lancaster, PA
Posts: 147
Default Re: Minor rear hight adjustment how to please?

Quote:
Originally Posted by jonszr1
thanx pards i found those spots and soon as i am done with thisI'll measure. Is there an aprox figure fr to back (for rake) . Proably should do it with a full tank. I think I'm going to really mess with my head and get the lowering kit so I can get the wheel wells filled up . Is an inch ok to lower.??
'till you get your manual:

Looking at the car from a side:

Front measuring spot is 652 mm (25 11/16") behind the front wheel centerline.

Rear measuring spot is 486 mm (19 1/8") front of the rear wheel centerline.

Shipping weight: coolant filled to capacity, 5.5 gallon fuel

Curb weight: coolant filled to capacity, full tank of fuel

Front height (at measuring spot):

Shipping weight: 195.1 mm
Curb weight: 193.1 mm

Rear height (at measuring spot):

Shipping weight: 208.8 mm
Curb weight: 199.6 mm

These specs are for a MY95 ZR1.

Warning: if you lower the rear an inch without lowering the front you loose the rake. Not sure what all evil things happen without that.
petefias is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025