Installing HID fogs - ZR-1 Net Registry Forums

XfireZ51 · 02-08-2014

I've been meaning to share this for a while. I installed the CorvetteMods HID fogs on my 92 ZR-1. However, I really don't like the idea of just shoving the spade connectors into the factory harness. I like something cleaner and more OEM both from a looks standpoint and safety.
You can modify the factory harness to accept the Corvette Mods connector if you have some simple tools. Just swap the connectors.
I suggest Corvette Mods copy this if and when I delete the pics.

OEM v Corvette Mod harness connectors

Remove OEM connector at Power end of OEM wiring harness

Do the same to the Corvette Mods supplied harness

Now just connect the harness to the ballast using the OEM harness w the Corvette Mods connector swapped in. And voila. No exposed wiring and no electrical tape kludge.
Make sure you have polarity correct

02-08-2014	#1
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Installing HID fogs I've been meaning to share this for a while. I installed the CorvetteMods HID fogs on my 92 ZR-1. However, I really don't like the idea of just shoving the spade connectors into the factory harness. I like something cleaner and more OEM both from a looks standpoint and safety. You can modify the factory harness to accept the Corvette Mods connector if you have some simple tools. Just swap the connectors. I suggest Corvette Mods copy this if and when I delete the pics. OEM v Corvette Mod harness connectors Remove OEM connector at Power end of OEM wiring harness Do the same to the Corvette Mods supplied harness Now just connect the harness to the ballast using the OEM harness w the Corvette Mods connector swapped in. And voila. No exposed wiring and no electrical tape kludge. Make sure you have polarity correct Last edited by XfireZ51; 02-08-2014 at 11:19 AM.